Robustel M1000 Pro V2 Guida Utente Scaricare il pdf (Pagina 42)

Robustel GoRugged M1000 Pro V2 User Guide

RT_UG_M1000 Pro V2_v.2.0.0 19.11.2013 41 / 69

Confidential

Connection 2 @

Master Mode

enable Connection 2.

Enter the remote Modbus slave IDs here which is corresponding to

“Connection 2”.

Slave ID Range of

Connection 3 @

Master Mode

Available when enable Modbus Gateway, select Master mode and

enable Connection 3.

Enter the remote Modbus slave IDs here which is corresponding to

“Connection 3”.

0-0

Connection 2

Tick this checkbox to enable the second TCP connection to the remote

TCP server. This TCP connection is usually used to connect to the

second Modbus slave gateway.

User need to enter the TCP server’s IP and port here.

Serial data come from Master device to M1000 Pro V2 will be sent to

different TCP server’s IP address according to the Slave ID.

Disable

Connection 3

Tick this checkbox to enable the third TCP connection to the remote

TCP server. This TCP connection is usually used to connect to the third

Modbus slave gateway.

User need to enter the TCP server’s IP and port here.

Serial data come from Master device to M1000 Pro V2 will be sent to

different TCP server’s IP address according to the Slave ID.

Disable

Note: Connection 2 and Connection 3 only can work under TCP client mode, cannot be configured.

3.2.15 Advanced

This tab allows user to set advanced settings after TCP connection is established. Whether need to set this

tab is depend on user’s application requirement.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 69 70

Nessun commento

Robustel M1000 Pro V2 Guida Utente Pagina 42